SPECIFICATIONS:

SERIAL NUMBER - # 010214555
INSTALLED NEW............NOV./2002

***** CUTTING HOURS********** 355

TABLE SIZE....................37" X 18.1"
TABLE POSITIONING ACCURACY....0002" (NEW SPEC)
MAX. WORKLOAD.................880 LBS.
TRAVELS  (X) AXIS.............26.0"
         (Y) AXIS.............18.22"
         (Z) AXIS.............19.09"
RAPID FEEDRATE (X/Y/Z)........1575, 1575, 1181 IPM
CUTTING FEEDS (X/Y/Z).........0.1" - 590" IPM
MANUAL FEED (CONT)............0 - 157 IPM
TABLE TO TPO SPINDLE END......5.9" - 25.0"
TABLE CTR TO COLUMN GUIDE.....10.63" - 28.74"
SPINDLE CTR TO COLUMN GUIDE...19.69"
SPINDLE TAPER.................BT #40
SPINDLE DIAMETER..............3.15"
SPINDLE SPEEDS................50 - 15,000 RPM
                              CERAMIC SPINDLE
SPINDLE MOTOR.................30/20 HP
MAX. SPINDLE TORQUE...........110 FT LBS
                              (150 N-M) @ 1400 RPM
SPINDLE DRIVE SYSTEM..........DIRECT DRIVE
# OF TOOLS....................30 ATC
TOOL POCKET PITCH.............4"
ATC TIME...................... .9 SEC.
DITTO CHIP TO CHIP............2.8 SEC.
RESOLUTION (CONTROL)..........0.0001"
PULS MIN. MOVEMENT (CONTROL)..0.0001"
POSITIONING ACCURACY (X/Y)  +/- 0.00020 FULL STROKE
                      (Z)   +/- 0.00024 FULL STROKE
REPEATABILITY:      (X/Y/Z) +/- 0.00004
MACHINE DIMENSIONS............163" x 165" x 108" HT
FLOOR TO TABLE................35.4"
MACHINE WEIGHT................12,540 LBS.

EQUIPPED WITH:

FANUC 16i-m  CNC CONTROLS
4th/5th AXIS ELECTRONICS   ($17,650.00)
RENISHAW PROBE
BROKEN TOOL DETECTION/
    TOOL LENGTH MEASURE    ($ 8,900.00)
IN-PROCESS MEASUREMENT     ($11,900.00)
IZ-2/60 SOFTWARE           ($12,500.00)
5120 MEMORY                ($ 4,500.00)
TSUDAKOMA TTNC-102 -
  4TH/5TH AXIS ROTARY TABLE ($26,250.00)
FANUC A2 64K INC ALPHA (2) MOTORS ($ 3,800.00)
CABLE SETS (2)             ($ 1,500.00)
135 MM FACEPLATE           ($   950.00)





PRICE....................: ${please call for price}